รายละเอียดสินค้า:
การชำระเงิน:
|
Fiber Channel: | 1.0625/2.125/4.25Gb/s | Gigabit Ethernet: | compatible |
---|---|---|---|
• 1310nm DFB Laser: | Support | SFP MSA SFF-8074i: | compatible |
• Digital Diagnostic SFF-8472: | Support | Warranty: | 2 years |
เน้น: | cisco compatible sfp modules,fiber optic transceiver module |
4.25G Single Mode Dual Fiber 10km 1310nm SFP Optical Transceiver Module
Features
Applications
Description
The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1. They are compatible with Fiber Channel per FC-PI-2 Rev. 10.0. also simultaneously compatible with Gigabit Ethernet as specified in IEEE Std 802.3.
Absolute Maximum Ratings
Table 1 - Absolute Maximum Ratings
Parameter | Symbol | Min | Max | Unit |
Power Supply Voltage | Vcc-Vee | 0 | 3.6 | V |
Operating Case Temperature (Commercial) | Tc | 0 | 70 | °C |
Operating Case Temperature (Industrial) | Tc | -40 | +85 | °C |
Storage Temperature | Ts | -40 | +85 | °C |
Operating Humidity | - | 5 | 90 | % |
Recommended Operating Conditions
Table 2 - Recommended Operating Conditions
Parameter | Symbol | Min | Typical | Max | Unit | |
Operating Case Temperature |
Standard Industrial |
Tc Tc |
0 -40 |
+70 +85 |
°C °C |
|
Power Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
Power Supply Current | Icc | 300 | mA | |||
Data Rate | 4.25 | Gbps | ||||
Optical and Electrical Characteristics
Table 3 - Optical and Electrical Characteristics
Parameter | Symbol | Min | Typical | Max | Unit | Notes | ||
Transmitter | ||||||||
Date Rate | 4.25 | Gb/S | ||||||
Centre Wavelength | λc | 1260 | 1310 | 1360 | nm | |||
Spectral Width (-20dB) | ∆λ | 1 | nm | |||||
Side Mode Suppression Ratio | SMSR | 30 | dB | |||||
Average Output Power (BOL) | Pout | -8 | 0 | dBm | 1 | |||
Extinction Ratio | ER | 5 | dB | |||||
Average Launch Power-OFF Transmitter |
Pout | -40 | dBm | |||||
Optical Eye Diagram | Fiber Channel Compliant | |||||||
Optical Rise/Fall Time(20%~80%) | tr/tf | 130 | ns | |||||
Data Input Swing Differential | VIN | 200 | 2400 | mV | 2 | |||
Input Differential Impedance | ZIN | 90 | 100 | 120 | Ω | |||
TX Disable | Disable | 2.0 | Vcc | V | ||||
Enable | 0 | 0.8 | V | |||||
TX Fault | Fault | 2.0 | Vcc | V | ||||
Normal | 0 | 0.8 | V | |||||
Receiver | ||||||||
Centre Wavelength | λc | 1260 | 1360 | nm | ||||
Receiver Sensitivity (BOL) | Sen | -18 | dBm | 3 | ||||
LOS De-Assert | LOSD | -18 | dBm | |||||
LOS Assert | LOSA | -28 | dBm | |||||
LOS Hysteresis | 0.5 | 6 | dB | |||||
Receiver Reflectance | -20 | dB | ||||||
Data Output Swing Differential | Vout | 350 | 1800 | mV | 4 | |||
Loss of Signal (LOS) Assert Time | TAssert | 500 | nS | |||||
Loss of Signal (LOS) DeassertTime | TDeassert | 500 | nS | |||||
LOS | High | 2.0 | Vcc | V | ||||
Low | 0 | 0.8 | V | |||||
Notes:
1. The optical power is launched into SMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 27-1 test pattern @4250Mbps, BER ≤1×10-12
4. Internally AC-coupled.
Timing and Electrical
Table 4 - Timing and Electrical
Parameter | Symbol | Min | Typical | Max | Unit |
Tx Disable Negate Time | t_on | 1 | ms | ||
Tx Disable Assert Time | t_off | 10 | µs | ||
Time To Initialize, including Reset of Tx Fault | t_init | 300 | ms | ||
Tx Fault Assert Time | t_fault | 100 | µs | ||
Tx Disable To Reset | t_reset | 10 | µs | ||
LOS Assert Time | t_loss_on | 100 | µs | ||
LOS De-assert Time | t_loss_off | 100 | µs | ||
Serial ID Clock Rate | f_serial_clock | 400 | KHz | ||
MOD_DEF (0:2)-High | VH | 2 | Vcc | V | |
MOD_DEF (0:2)-Low | VL | 0.8 | V |
Diagnostics
Table 5 – Diagnostics Specification
Parameter | Range | Unit | Accuracy | Calibration |
Temperature | 0 to +70 | °C | ±3°C | Internal / External |
-40 to +85 | ||||
Voltage | 3.0 to 3.6 | V | ±3% | Internal / External |
Bias Current | 0 to 100 | mA | ±10% | Internal / External |
TX Power | -9 to -3 | dBm | ±3dB | Internal / External |
RX Power | -23 to -3 | dBm | ±3dB | Internal / External |
Digital Diagnostic Memory Map
The transceivers provide serial ID memory contents and diagnostic information about the present operating conditions by the 2-wire serial interface (SCL, SDA).
The diagnostic information with internal calibration or external calibration all are implemented, including received power monitoring, transmitted power monitoring, bias current monitoring, supply voltage monitoring and temperature monitoring.
ผู้ติดต่อ: Mike Peng
โทร: 136 8646 9576
แฟกซ์: 86-755-8312-8674
E-Link Gigabit Power Over Ethernet Injector 12 ~ 48VDC อินพุตไฟราง DIN / ตัวยึดติดผนัง
อุปกรณ์ Power Over Ethernet แบบพอร์ตเดียว 60W รองรับการติดตั้ง Din Rail / Wall Mount
10/100 / 1000Mbps พลังงานสูง Poe Injector 95 วัตต์ 802.3bt ส่ง 100m
48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
มินิ 4K HDMI ออปติคัล Extender Uncompressed Multimode USB Input 300M
4K SFP LC 80km ตัวขยายไฟเบอร์ HDMI 10.3Gbps ตัวขยายไฟเบอร์โหมดเดียว
SFP 5VDC HDMI ผ่านตัวขยายไฟเบอร์ออปติก Micro 4K พอร์ต USB 80Km
4K*2K HDCP 10.3Gbps HDMI Fiber Extender SFP LC พร้อมระบบเสียงภายนอก
Mini 3G/HD-SDI เป็น Fiber Converter Extender พร้อมฟังก์ชัน Tally หรือ RS485 Data
3G-SDI SDI ไปยังตัวแปลงสัญญาณวิดีโอไฟเบอร์ออปติกผ่านไฟเบอร์ส่งสัญญาณยาว 20KM
HD SDI To Fiber Optic Converter with Forward Audio
Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M